Forklift Training Program Avondale

Forklift Training Program Avondale - The lift truck is a common powered industrial vehicle which is in wide use nowadays. They are sometimes known as lift trucks, jitneys or hi los. A departments store would utilize the forklift in order to unload and load products, while warehouses will use them in order to stack products and materials. And grocery stores utilize small models to drop supplies in the aisles. Whether loading material at a construction site or transporting lumber at a sawmill, forklift operators should be trained properly and certified. The main concern must be on the safety of the pedestrian and worker. This lift truck training program teaches the health and safety regulations governing forklifts to be able to guarantee their efficient and safe utilization.

Forklift Training Program Safety Tips:

Proper training ensures that forklift operators are able to maintain control of the forklift throughout traveling, lifting and tilting. Only qualified operators should drive a forklift.

Safety tips when traveling - hands, head, legs, arms and feet must be kept in the forklift truck throughout traveling. The forks should be tilted back and low to the ground. Observe traffic signs which are posted. Honk the horn and lessen speed if taking a corner. If the driver's vision is blocked by the load, drive backwards slowly. Pre-inspect the ground for potential hazards, such as objects, wet or oily spots, holes, rough patches, people and vehicles. Prevent sudden stops.

When a vehicle or a person crosses the lift truck's blind spot, stop the truck, lower the load, and do not continue until the way is clear. When traveling on an incline, the forks should be pointed uphill with a load and downhill without a load. The lift truck must just be turned around when on level ground.

Safety tips while steering - If traveling at good speeds, never turn the steering wheel sharply. Support the load utilizing the front wheels and turn using the rear wheels. A truck that is overloaded will be hard to steer. Follow load limitations. Never add a counterweight in order to improve steering.

Safety tips while loading - Follow the suggested capacity and load restrictions of the lift truck. This information is displayed on the data plate. Always ensure that the load is positioned based on the recommended load centre. The lift truck will remain stable so long as the load is kept near the front wheels.

Prior to inserting the forks into the pallet, the forklift mast must be in an upright position. Level the forks prior to inserting them.

Click to Download the pdf